EL KADESIA E 309L-15

Low-Alloy-Steel-EL-KADESIA-E-8018-B3-1-e1675952200948-640x613

AWS A5.4: E309L-15

EN ISO 3581-A : E 23 12 L B 32

Description

The bare wire is low carbon alloyed austenite with rutile flux coating, high impedance of crack propagation with hard-to- weld materials, austenite- ferrite joints and weld cladding is achieved through the increased ferrite content in the weld metal, good welding properties and very good AC weldability.

Description

Typical Composition of all-weld Metal

	C	Si	Mn	P	S	Ni	Cr	Mo	Cu
Wt. %	0.025	0.41	1.22	0.02	0.01	13.5	22.7	0.1	0.01
Typical according to ASME II part C /SFA 5.4	0.04 max	1.0 max	0.5-2.5	0.04 max	0.03 max	12.14	22.25	0.75 max	0.75 max

Mechanical Test of weld Metal

Heat

Treatment

Yield Strength N/mm2

Tensile Strength N/mm2

Elongation% L0=5d0

Impact Strength
“Joule”
-196 º C

Ferrite Number

Typical

420

580

Typical According to ASME II part C/SFA 5.4

N.S

≥ 520

≥ 30

Operating Data

Re – drying: if necessary: 300 – 350 ºC, min. 2 h.

mm	2.5mm	3.25 mm	4.0mm	5.0mm
L mm	350	350	350	350
Amps A	50-80	80-110	110-140	140-180

Welding Positions

All, except vertical down

Polarity

DC (+)

Description

Typical Composition of all-weld Metal

Mechanical Test of weld Metal

Operating Data

Welding Positions

Polarity

Reviews

Be the first to review “EL KADESIA E 309L-15” Cancel reply

A word about kadesia

El-Kadesia Engineering Industries is the Egyptian market leader in manufacturing of Shielded Metal Arc Welding (SMAW) since 1985 by its founder Mr. Mohamed Naguib Gwefel;

is the Egyptian market leader in welding electrodes with more than 38 years of accumulated experience in the industry.
El-Kadesia was established in 1985 by its founder Mr. Naguib Gwefel ........

About

Subscribe

Description

Typical Composition of all-weld Metal

Mechanical Test of weld Metal

Operating Data

Welding Positions

Polarity

Related products

Reviews

Be the first to review “EL KADESIA E 309L-15” Cancel reply